ECOGLO® GUIDANCE STRIP T5 SERIES 2018-10-18T14:40:11+00:00

ECOGLO® GUIDANCE STRIP T5 SERIES

T5-G3001 Guidance Strip

The T5-G3001 is designed to clearly outline a pathway and provide a guidance system that will reduce falls and enhance egress speed in all egress situations. The G3001 guidance strip insert is designed to be visible for several hours after the lights go out, having been charged from overhead or natural lighting.

The T5 aluminum channel is first installed using both fasteners and adhesive. The G3001 photoluminescent guidance strip is then applied into the channel using double sided tape. Working just as well in the light as it does in the dark, the G3001 Guidance Strip is designed to work in all lighting conditions.
Certified to ULC572 standard

1. High visibility in dark or light conditions
Brightness:

  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11, Safety Colours and Safety Signs- Classification, Performance and Durability of Safety Signs.

2. High durability indoors and outdoors.
UV Stability:

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling.

3. Reduces Slips
Slip Resistance:

  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.

4. Hard Wearing
Abrasion Resistance:

  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys- Wheel wear test.

5. Easy Cleaning
Washability:

  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

6. No radioactivity or toxicity
Radioactivity:

  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.

7. Does not burn
Flammability:

  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.
CONTACT US TODAY