Ecoglo^® Cast in Place Stair Nosing S2 Series

S2 CAST IN PLACE STAIRS NOSINGS

The S2 Series aluminum cast-in-place stair insert incorporates Ecoglo^®’s state-of-the-art photoluminescent and silicon carbide non-slip technology for interior and exterior applications. With superior visibility in all light conditions, Ecoglo^® stair inserts help prevent slips and falls. Weatherometer and abrasion resistance testing rates Ecoglo^® life cycle durability at over 30 years!

Benefits and Technical Details

1. High visibility in dark or light conditions
Brightness:

ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
ISO 17398:2004 Clause 7.11, Safety Colours and Safety Signs- Classification, Performance and Durability of Safety Signs.

2. High durability indoors and outdoors.
UV Stability:

ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling.

3. Reduces Slips
Slip Resistance:

UL410, Standard for Slip Resistance for Floor Surface Materials.
AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.

4. Hard Wearing
Abrasion Resistance:

ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys- Wheel wear test.

5. Easy Cleaning
Washability:

ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

6. No radioactivity or toxicity
Radioactivity:

ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.

7. Does not burn
Flammability:

ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.

Product Overview / Standard Colours

S2050

S2060

S2070

S2051

S2061

S2071

Dimensions

Download Product Data

PDF – S2-E30 Photoluminescent Cast in Place Stair Nosing Data Sheet

PDF – S2-N30 Cast in Place Stair Nosing Data Sheet

Leed Data

Qualifies for LEED Points

MR Credit 2: Construction Waste Management Divert from Land Fill

Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content

Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo^® secondary billet specification is recycled scrap.

Ecoglo^®’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1.